Canon R-F10 Full Auto Refractor
From Partnumber.org Part Numbers, SKUs, Product Information Directory
|
Contents |
[edit] Product Name
Canon R-F10 Full Auto Refractor
[edit] Manufacturer Part Number
R-F10
[edit] Product Date
circa November 2006
[edit] Product Image
[edit] Manufacturer Provided Specifications and Description
- Overview
The R-F10 Full Auto Refractor simplifies the standard measurement procedure to an unprecedented degree--all operations in just one step. With a press of the start button, the R-F10 automatically completes the entire series of steps for both eyes: alignment, measurement, and printout. This process promises not only to reduce overall exam time, but in combination with improved measurement technology, will raise the accuracy and reliability of eye exams.
- Features
Easier, more comfortable operation
The R-F10 replaces the conventional joystick with a trackball and roller tandem that eases hand movement during manual alignment. Once the examinee's pupil is visible in the monitor, press the start button to initiate--and complete--refraction measurement.
More efficient exam procedures
The measurement head covers an exceptional wide area, thus speeding up the auto-alignment process, and the built-in printer delivers your printout faster than ever.
Motorized chin rest
A motorized chin rest offers easy adjustment of the unit when beginning the eye examination.
Ergonomic centralized control keys
The layout of the operation panel makes the unit easy to use from either a seated or standing position. For your convenience, the control keys for each main function are grouped together.
Increased measurement reliability
By simplifying operation, Canon's fully automated measurement technology, takes on a greater share of the workload and increases the reliability of measurement data. What's more, the unit's monitor employs a deep focal point, which makes it easier for you to tell whether an examinee's eyelashes are obstructing measurement.
Optional Accessories
- Printing paper
- Chin rest paper
- Motorized table
- Printer cable
- Specifications
Refractometry |
|
Sphere (SPH) |
-30 to + 22D when VD = 12 mm (Increments: 0.12D and 0.25D) |
Cylinder (CYL) |
0 to +/-10D (Increments: 0.12D and 0.25D) |
Axis (AX) |
1 degree to 180 degree |
Pupil distance (PD) |
Maximum 85 mm (Increments: 1 mm) |
Vertex distance (VD) |
0/12/13.5 mm |
Cylinder form |
-, +, +/- |
Minimum pupil size |
2.5 mm diameter |
|
|
General |
|
Measurement values |
10 for each eye |
Standard value |
1 for each eye |
Pupil distance |
1 |
Printing |
Thermal line printer (Prints measurements, date, time, serial number, and eye diagram.) |
Data output |
RS232C (The instrument to be connected must comply with the IEC601-1 standard.) |
|
|
Electrical and Environmental |
|
Power saving system |
Monitor, lamp, and motor go into Sleep mode when operation is discontinued for approximately 5 minutes. |
Power supply |
110/120V, 220/240V, 230V |
|
|
Physical Dimensions |
|
Dimensions (W x L x H) |
Approximately 11 inches x 20.5 inches x 18.5 inches |
Weight |
Approximately 46 pounds (21 kg) |
[edit] External Links
[edit] Where to Buy
[edit] Discussion Board
| |
