Canon Speedlite Transmitter ST-E2 Flash
From Partnumber.org Part Numbers, SKUs, Product Information Directory
|
Contents |
[edit] Product Name
Canon Speedlite Transmitter ST-E2 Flash
[edit] Manufacturer Part Number
Speedlite Transmitter ST-E2
[edit] Product Date
circa July 2005
[edit] Product Image
[edit] Manufacturer Provided Specifications and Description
- Overview
Dedicated clip-on transmitter for E-TTL/E-TTL II wireless flash system.
Item Code: 2478A002 Suggested Retail Price: $350.00†
- Features
- E-TTL Compatible
- Built-in AF-Assist Beam
- Sets and Controls Flash Rations
- High-Speed FP Flash
- E-TTL Wireless Autoflash Control
- Specifications
Flash
Type: 550EX-dedicated, clip-on Speedlite transmitter with direct contacts
Compatible Cameras: Type A EOS cameras (E- TTL, autoflash); Type B EOS cameras (Manual flash)
Sync Speed: High-Speed Sync (FP flash): Enabled with high-speed sync mode
Flash Exposure Confirmation:
- 1. Before flash fires during FE lock Adequate flash exposure indicated by the flash exposure level icon lit in the viewfinder. Insufficient flash exposure indicated by the flash exposure level icon blinking in the viewfinder.
- 2. After flash fires ST-E2's flash confirmation lamp lights in green for 3 sec.
AF Assist Beam: Compatible with EOS-3's 45-point Area AF and 28mm and longer lens focal lengths; Effective Range: Approx. 0.6 to 10m/2.0 to 16.5 ft along the periphery (in total darkness).
Wireless Functions
Transmission System: Infrared pulse
Transmission Range: Indoors: Approx. 12-15 m/39.4 - 49.2 ft; Outdoors: Approx. 8-10 m/ 26.2-32.8 ft
Flash Ratio Control: For A:B ratio: 1:8 to 8:1, in half- step increments or 13 steps
Flash Coverage: Transmission Coverage: +/-40 degrees horizontal and +/-30 degrees vertical
Slave Operation Confirmation: With test transmission button. *Slave A fires followed by slave B at 1/64 output.
Slave Unit SE Mode Cancellation: Cancels when the test transmission button or FE lock botton is pressed to turn on the slave unit.
General
Power Source: 2CR5 lithium battery x 1; Battery Life: Approx. 1,500 transmissions (At room temperature and with a new set of batteries)
SE Mode: While the power switch is set to I or HOLD, the transmission turns off automatically after about 90 sec. of non-use.
Dimensions: 62 (W) x 51 (H) x 80 (D)mm/2.4 (W) x 3.1 (D) in
Weight: 100g/3.5 oz (exluding battery)
Footnotes
† Prices and specifications subject to change without notice. Actual prices are determined by individual dealers and may vary.
[edit] External Links
[edit] Where to Buy
[edit] Discussion Board
| |
