Linksys PAP2T Internet Phone Adapter with 2 Ports for Voice-over-IP
From Partnumber.org Part Numbers, SKUs, Product Information Directory
|
Contents |
[edit] Product Name
Internet Phone Adapter with 2 Ports for Voice-over-IP
[edit] Manufacturer Part Number
PAP2T
[edit] Product Date
circa 2007
[edit] Product Image
[edit] Manufacturer Provided Specifications and Features
Specifications
Data Networking
MAC Address (IEEE 802.3) IPv4 - Internet Protocol v4, upgradeable to v6 ARP - Address Resolution Protocol DNS - A Record, SRV Record DHCP Client - Dynamic Host Configuration Protocol ICMP - Internet Control Message Protocol TCP - Transmission Control Protocol UDP - User Datagram Protocol RTP - Real Time Protocol RTCP - Real Time Control Protocol DiffServ, Type of Service - TOS SNTP - Simple Network Time Protocol
Voice Gateway
SIPv2: Session Initiation Protocol v2 SIP Proxy Redundancy - Dynamic via DNS SRV, A Records Re-registration with Primary SIP Proxy Server SIP Support in Network Address Translation Networks - NAT Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP Codec Name Assignment
Voice Algorithms
G.711 (A-law and μ-law) , G.726 (16/24/32/40 kbps), G.729 A, G.723.1 (6.3 kbps, 5.3 kbps) Dynamic Payload Adjustable Audio Frames per Packet Fax Capability Fax Tone Detection Pass-Through Fax Pass-Though - Using G.711 DTMF: In-band & Out-of-band Flexible Dial Plan Support with Interdigit Timers and IP Dialing Call Progress Tone Generation Jitter Buffer - Adaptive Frame Loss Concealment Full Duplex Audio Echo Cancellation (G.165/G.168) VAD - Voice Activity Detection with Silence Suppression Attenuation / Gain Adjustments Flash Hook Timer MWI - Message Waiting Indicator Tones VMWI - via FSK Polarity Control Hook Flash Event Signaling Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI Music on Hold Client Streaming Audio Server - up to 10 sessions
Security
Password Protected System Reset to Factory Default Password Protected Admin and User Access Authority Provisioning/Configuration/Authentication: HTTPS with Factory Installed Client Certificate HTTP Digest - Encrypted Authentication via MD5 Up to 256-bit AES Encryption Web Browser Administration & Configuration via Integral Web Server ProvisioningAdministration Telephone Key Pad Configuration with Interactive Voice
Prompts & Maintenance
Web Browser Administration & Configuration via Integral Web Server Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP Asynchronous Notification of Upgrade Availability via NOTIFY Non-intrusive, In-Service Upgrades Report Generation & Event Logging Stats in BYE Message Syslog & Debug Server Records - Per Line Configurable Web Browser
Physical Interfaces
1 10BaseT RJ-45 Ethernet Port (IEEE 802.3) 2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring)
Subscriber Line Ring Voltage
40-55 VRMS Configurable * Interface Circuit Ring Frequency: 10 Hz - 40 Hz * (SLIC): Ring Waveform: Trapezoidal and Sinusoidal * Maximum Ringer Load: 3 REN On-hook/off-hook Characteristics: On-hook voltage (tip/ring): -50 V NOMINAL Off-hook current: 25 mA min Terminating Impedance: 8 Configurable Settings including North America 600 ohms, European CTR21
Regulatory Compliance
FCC (Part 15, Class B), cUL, CE, IC-003, A-Tick Power Supply: DC Input Voltage: +5 VDC at 2.0 A Max. Power Consumption: 5 Watts Switching Type (100-240v) Automatic Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord
Indicator Lights/LED
Phone1, Phone2, Internet, Power Documentation: Quick-Start Installation and Configuration Guide User Guide Administration Guide - Service Providers Only Provisioning Guide - Service Providers Only
Feature
Two voice ports (RJ-11) for analog phones or Fax machines Impedance Agnostics - 8 Configurable Settings Call Waiting, Cancel Call Waiting, Call Waiting Caller ID Caller ID with Name/Number (Multi-national Variants) Caller ID Blocking Call Forwarding: No answer, Busy, All Do Not Disturb Call Transfer Three-way Conference Calling with Local Mixing Message Waiting Indication - Visual and Tone Based Call Return Call Back on Busy Call Blocking with Toll Restriction Delayed Disconnect Distinctive Ringing - Calling and Called Number Off-hook Warning Tone Selective/Anonymous Call Rejection Hot line and Warm Line Calling Speed Dialing of 8 Numbers/Addresses Music on Hold PAP2T Phone Adapter Unit Power Adapter RJ-45 Ethernet Cable Quick Installation Guide
Feature-Rich VoIP Service through your High-Speed Internet Connection
The Linksys Internet Phone Adapter enables high-quality feature-rich VoIP (Voice over IP) service through your broadband Internet connection. Just plug it into your home router or gateway and use the two standard telephone ports to connect analog phones or fax machines. Each phone port operates independently, with separate phone service and phone numbers, like having two telephone lines. You'll get clear reception and reliable fax connections, even while using the Internet at the same time.
With Internet telephony, along with low domestic and international phone rates, an impressive array of special telephone features are available. Choose your preferred local dialing number, regardless of where you live. Or add a virtual telephone number to have forwarded to your Internet phone. You can even add a toll-free number. The Linksys Internet Phone Adapter is compatible with these and all of the other special telephone features that are available from your Internet telephone service provider, such as Caller ID, Call Waiting, Voicemail, Call Forwarding, Distinctive Ring,and much more.
[edit] External Links
[edit] Where to Buy
[edit] Discussion Board
| |
