Linksys WAP200E Wireless-G Exterior Access Point with Power Over Ethernet
From Partnumber.org Part Numbers, SKUs, Product Information Directory
|
Contents |
[edit] Product Name
Linksys WAP200E Wireless-G Exterior Access Point with Power Over Ethernet
[edit] Manufacturer Part Number
WAP200E
[edit] Product Date
circa June 2007
[edit] Product Image
[edit] Manufacturer Specifications & Features
Wireless-G Exterior Access Point with Power over Ethernet High-speed wireless access for exterior environments!
The Linksys Wireless-G Exterior Access Point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. This weatherproof Access Point creates a “wireless bubble” in exterior spaces, like patios and outdoor cafés. Power over Ethernet support makes it easy to install, and you can create multiple BSSIDs that connect to individual VLANs to keep your traffic separated.
It’s also perfect for use as a bridge, a kind of “cable-less cable” to connect remote areas together. Maybe your warehouse is in a separate building from your offices. Or maybe you need to connect the separate buildings of a college campus. With one Wireless-G Exterior Access Point on each building, you’re connected at up to Wireless-G speeds—with no cable to run. The weatherproof housing (NEMA IP53 rated) protects the access point and is lightning protected.
To protect your data and privacy, the Wireless-G Exterior Access Point supports both Wired Equivalent Privacy (WEP) and the industrial-strength wireless security of Wi-Fi Protected Access™ (WPA), encoding all your wireless transmissions with powerful encryption. The MAC Address filter lets you decide exactly who has access to your wireless network, and advanced logging keeps you apprised. Configuration is a snap with the web browser-based configuration utility.
RangeBooster technology is a compatible add-on to standard Wireless-G which increases your wireless network’s range up to two times, and its throughput by up to 35%. Unlike ordinary wireless technologies that are confused by signal reflections, RangeBooster uses two smart receivers at each end to detect and decode reflected signals at distances where standard technologies give up. You’ll find that “dead spots” in the wireless coverage area are reduced, too.
Moreover, the integrated QoS features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business quality VoIP and video applications.
Additional features like Multiple BSSIDs, Wireless Roaming, and Auto-Channel selection, make this solution ideal for your Business.
Features
- NEMA IP53 rated, lightning protected, weatherproof housing
- 10Base-T/100Base-TX Ethernet port, autosensing half/full duplex and MDI/MDI-X
- Built-in 6-dBi directional antenna with 1x2 MIMO to increase coverage Obtains power via 802.3af Power over Ethernet (PoE) from a PoE switch or power injector
- Simplified Web interface for installation and configuration
- Security Features: 802.1X/RADIUS Authentication
- Supports WEP, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2‑-ENT wireless security
- Supports 4 BSSID and 802.1Q VLAN to SSID mapping
- Supports SNMP and intuitive Web-based interface
- WMM wireless QoS support
- Supports wireless roaming based on 802.11F (IAPP)
- Supports AP, Bridge Mode and Repeater mode
- Supports wireless security monitoring (working together with 200 series client cards)
- Supports wireless client isolation
- 3 Year limited warranty
Specifications
- Standards IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, IEEE802.3af (Power over Ethernet), 802.1p (QoS priority), 802.1Q (VLAN), 802.1X (Security Authentication), 802.11i - Ready (Security WPA2), 802.11e - Ready (WMM & U-APSD), 802.11F (Wireless Roaming)
- Ports 1 Ethernet, 1 External Antenna
- Buttons Reset
- Cabling Type UTP CAT 5
- LEDs Power, Ethernet, Wireless
- Operating System Linux
Setup/Config
- Web UI Built-In Web UI for Easy Browser-Based Configuration (HTTP/HTTPS)
- Static IP Yes
- DHCP Client Yes
Management
- SNMP Version 1, 2 and 2c
- Event Logging Yes
- Web F/W Upgrade Yes
- Diags Flash, RAM, LAN, WLAN
Operating Modes
- Access Point Access Point Mode, Point-to-Point Bridge Mode, Point-to-Multipoint Bridge Mode, Repeater Mode
Wireless
- Spec/Modulation 802.11b/DSSS, 802.11g/ODFM
- Data Rates 802.11b: 1, 2, 5.5, 11 Mbps; 802.11g: 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
- Channels 11 North America, 13 Europe (ETSI and Japan) Auto-Channel Selection
- Number of Internal Antennas 2 x 6 dBi (directional)
- Antenna Connector Type Reverse Polarity Female N-Type
- Detachable Antenna Yes (sold separately)
- RF Power (EIRP) in dBm 802.11g: Typical – 16.5 dBm, 802.11b: Typical – 17 dBm
- Antenna Gain in dBi Internal Antenna: 6 dBi
- Adjustable Power Yes
- Receiver Sensitivity 802.11g: 54 Mbps@ -65 dBm, 802.11b: 11 Mbps@ -85 dBM
Security
- WEP/WPA/WPA2 WEP, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
- Connection Control Wireless Connection Control: MAC-Based
- SSID Broadcast SSID Broadcast Enable/Disable
- 802.1X IEEE 802.1X Support
- Wireless Client Isolation Wireless Client Devices Can Be Isolated from Each Other Either Within an SSID or Between Two SSIDs. However, Both Isolation Modes Can Be Enabled at the Same Time.
- Web-Based Utility Access Control HTTP/HTTPS, Wireless Client Web GUI Access Control
Wireless Security
- WEP Bits 64, 128
- WPA Bits and Params. 128 - TKIP/AES
- WPA2 Bits and Params. 256 - AES
- SSID Broadcast On/Off Yes
- Client Isolation Yes
- MAC-based Wireless Connection Control Yes
- Wireless Web GUI Access On/Off Yes
Quality of Service
- QoS 4 Queues WMM Wireless Traffic Prioritization
General
- Wireless Roaming Based on IAPP (802.11F)
- Auto-Channel Selection
Environmental
- Dimensions 6.42" x 8.07" x 2.17"
- W x H x D (163 x 205 x 55 mm)
- Unit Weight 2.47 lb (1.121 kg)
- Mounting options Industrial-Strength, Weatherproof Housing, NEMA IP53 Rating,
- Lighting Protection for Outdoor Enclosure, Ceiling- or Wall-Mountable
- Power 48VDC Max Power Draw: 4.8 W
- PoE In Y/N Yes
- Certification FCC, IC,CE
- Operating Temp. -4 to 140ºF (-20 to 60ºC)
- Storage Temp. -4 to 140ºF (-20 to 60ºC)
- Operating Humidity 5 to 95%, Noncondensing
- Storage Humidity 5 to 95%, Noncondensing
Package Contents
- Wireless-G Exterior Access Point with Power over Ethernet
- User Guide on CD-ROM
- Mounting Plate with Hardware
- 12-ft Weather-Resistant Network Cable
- Registration Card
Minimum Requirements
- 802.11b or 802.11g Wireless Adapter with TCP/IP Protocol Installed per PC
- Switch/Router with Power over Ethernet (PoE) Support or PoE Injector
- Web-Based Configuration: Java-Enabled Web Browser
[edit] External Links
[edit] Where to Buy
[edit] Discussion Board
| |
