Linksys WAP54GP Wireless-G Access Point with Power Over Ethernet
From Partnumber.org Part Numbers, SKUs, Product Information Directory
|
Contents |
[edit] Product Name
Linksys WAP54GP Wireless-G Access Point with Power Over Ethernet
[edit] Manufacturer Part Number
WAP54GP
[edit] Product Date
circa 2007
[edit] Product Image
[edit] Manufacturer Provided Specifications and Description
Wireless-G Access Point with Power Over Ethernet
High-Speed Wireless Access for Existing Networks!
- Add high-speed Wireless-G access to your wired small business network
- Data rates up to 54Mbps in Wireless-G (802.11g) mode, or 11Mbps in Wireless-B (802.11b)
- Multiple SSID and VLAN support keeps your traffic separated
- Advanced security with WPA encryption, logging, and wireless intrusion protection
The Linksys Wireless-G Access Point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet support makes it easy to install -- you can mount the Access Point anywhere, even without ready access to a power plug. With appropriate Power Over Ethernet support at the other end, you only need to run one cable to the Access Point to deliver both data and power.
It's also perfect for use as a bridge, a kind of "cable-less cable" to connect remote areas together. Maybe Shipping is all the way across the warehouse from Receiving. Or maybe you want to set up a home office in your detached garage. With one Wireless-G Access Point in each end, you're connected at 54Mbps – with no cable to run.
To protect your data and privacy, the Wireless-G Exterior Access Point supports both Wired Equivalent Privacy (WEP) and the industrial-strength wireless security of Wi-Fi Protected Access™ (WPA), encoding all your wireless transmissions with powerful encryption. The MAC Address filter lets you decide exactly who has access to your wireless network, and advanced logging and emailed intrusion alerts keep you appraised. You can create multiple SSIDs that connect to individual VLANs to keep your traffic separated. Configuration is a snap with the web browser-based configuration utility.
The Linksys Wireless-G Access Point with Power Over Ethernet is the best way to add wireless access to your existing business network.
Features
- 802.11g supports data rates up to 54Mbps
- Backwards compatible with existing 802.11b devices
- Supports multiple SSID with VLAN to create separate, secured networks
- Supports Power over Ethernet (PoE)
- Supports SNMP management
Specifications
- Model Number WAP54GP
- Standards IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, IEEE802.3af (Power Over Ethernet), IEEE802.1p (QoS Priority), IEEE802.1q (VLAN), 802.1x (Security Authentication), 802.11i - Ready (Security WPA2), 802.11e - Ready (Wireless QoS)
- Ports Ethernet, Antenna, Power
- Buttons Reset
- Cabling Type UTP CAT 5
- LEDs Power, Ethernet, Wireless-G
- Setup/Configuration
- Web UI Built-in Web UI for Easy Browser-based Configuration (HTTP/HTTPS)
- Management
- SNMP Version SNMP Version 1, 2c
- Event Logging Event Logging
- Web F/W Upgrade Firmware Upgradeable through Web Browser
- Diags: Flash, etc. Diags: Flash, RAM, LAN, WLAN
- Operating Modes
- Access Point Access Point Mode
- Point-to-Point Point-to-Point (Bridge)
- Point-to-Multipoint Point-to-MultiPoint (Bridge)
- Repeater Repeater
- Wireless
- Specs/Modulation Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM
- Data Rates Data Rates Supported 11b: 1, 2, 5.5, 11 Mbps, 11g: 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
- Channels Operating Channels: 11 North America, 13 Most of Europe (ETSI and Japan)
- # of Internal Ant. None
- # of External Ant. 1 (Omni-Directional)
- Antenna Connector Type RSMA
- Transmit Power Transmit Power (Adjustable) @ Normal Temp Range: 11g: Typical - 14dBm, 11b: Typical - 18dBm
- Receiver Sensitivity Receiver Sensitivity 11g: 54Mbps@ -69dBm, 11b: 11Mbps@ -82dBM
- Security
- WEP/WPA/WPA2 WEP 64bit/128bit, WPA-TKIP/AES, WPA-PSK, WPA-ENT 802.1x RADIUS Auth. 802.1x - RADIUS (MD5, SHA1, TLS, TTLS, PEAP) Dynamically Varying
- Encryption Keys
- Access Control Access Control List (ACL) Capability: MAC-Based
- SSID Broadcast SSID Broadcast Enable/Disable
- Multiple SSID Supports Multiple SSIDs
- Wireless VLAN Map Supports SSID to 802.1q VLAN Mapping with Wireless Client Isolation
Environmental
- Dimensions 1.26" x 7.83" x 6.89"
- W x H x D (32 mm x 199 mm x 175 mm)
- Unit Weight 1.01 lbs. (0.46 kg)
- Power 12V 1A, IEEE802.3af Compliant PoE
- Certifications FCC, CE
- Operating Temp. -4ºF to 140ºF (-20ºC to 60ºC)
- Storage Temp. -4ºF to 140ºF (-20ºC to 60ºC)
- Operating Humidity 5% to 95% Non-Condensing
- Storage Humidity 5% to 95% Non-Condensing
- Warranty 3-Years Limited
Minimum Requirements
- 802.11b or 802.11g Wireless Adapter with TCP/IP Protocol Installed per PC
- Network Adapter with Ethernet Network Cable and TCP/IP Protocol Installed per PC
- Switch/Router with Power Over Ethernet (PoE) Support or PoE Injector
- Web-Based Configuration Java-Enabled Web Browser
[edit] External Links
[edit] Where to Buy
[edit] Discussion Board
| |
